Hydraway

MDTI manufactures and distributes the industry leading Hydraway Drainage System. Engineers choose Hydraway due to its high compressive strengths, inflow rate, and guaranteed results.

The specially engineered design permits high inflow rates for rapid dewatering of the turf area while effectively preventing passage of soil particles. We specialize in drainage for: sports turf, athletic fields, golf courses, highways, and runways, as well as under pond liners as a vent and waterproofing for basements and crawlspaces.

The Hydraway Drainage System is the fastest in the industry. It has a 80% inflow rate, which is 7 to 25 times higher than most other systems. It is capable of withstanding 11,000 lbs/ft2. The entire system is a superior performing and cost effective replacement for the “French” drain, or other conventional “drain-tile” systems.

Hydraway Drainage System

The Hydraway Drainage System has been used across the world in sports fields, natural turf, synthetic turf, golf courses, civil applications, roadways, landscaping, and residential waterproofing and drainage applications. Learn more on how Hydraway can benefit your next drainage project here.

Hydraway Waterproofing System

The Hydraway Waterproofing System removes water 70% faster from basements than standard methods. Combined with its no-clog guarantee, this system is the best for keeping basements dry.

Hydrapump

MDTI offers the Hydrapump sump pump to complete the drainage system and pump water out of the interior of the home. The Hydrapump is the industry’s best performing sump pump on the market.

Hydrashield

The Hydrashield Wall Paneling system is a basement moisture barrier that can brighten up an unsightly basement adding a “finished” look to any basement, while ultimately protecting the interior from incoming moisture. With easy installation consisting of rigid panels and matching connectors, MDTI’s moisture barrier system is ideal for residential waterproofing contractors.

Hydraliner

Crawlspaces are prone to retaining moisture, bringing humidity levels to well over 50%. Combined with low lighting, they are ideal places for mold and other bacteria to thrive. MDTI provides the Hydraliner system to help prevent the possibility of these growths.

Testimonials

Engineers choose Hydraway due to its high compressive strengths, inflow rate, and guaranteed results. Read what some of the top drainage contractors in the country have to say about their experience with Hydraway.

Hydraway 2000 Physical Properties

Product Test Method Typical Value
Compressive Strength ASTM D-695/16211 11,400 PSF
Flow Rate At 1,500 PSF ASTM D-471622 21 GPM/ft-width
Peel Strength3 ASTM D-1876 50 lbs/ft-width
Fabric (4.5 oz.)
Elongation ASTM D-4632-91 50%
Grab Tensile ASTM D-4632-91 120 lbs
Puncture Strength ASTM D-4833-00 65 lbs
Mullen Burst Strength ASTM D-3756-87 225 psi
Trapezoidal Tear ASTM D-4533-91 50 lbs
Wide width Tensile ASTM D-4595 50 lbs/in
UV Resistance (500 hours) ASTM D-4355-02 70%
Permitivity ASTM D-4491-99A 1.8 sec
Permeability ASTM D-4751-99A4 .21 cm/sec
Flow Rate ASTM D-4491 135 gal/min/ft24
AOS (EOS) ASTM D-4751-99A 70 US Standard Sieve
Roll Dimensions
Width 6, 12, 18, or 24 inches – Other sizes available upon request
Length 150 feet – up to 550′ available upon request
Footnotes
1. Modified – an existing ASTM test was modified since a recognized test method had not been established for this type of product at time of testing.
2. Gradient of 0.1
3. Fabric to core
4. Values shown are in weaker principal direction. Minimum average roll values are calculated as the typical minus two standard deviations. Statistically, it yields a 97.7% degree of confidence that any samples taken from quality assurance testing will exceed the value reported.

Hydraway 300 Physical Properties

Product Test Method Typical Value
Compressive Strength ASTM D-695/16211 19,000 PSF
Flow Rate At 1,500 PSF ASTM D-47162 27 GPM/ft-width
Peel Strength3 ASTM D-1876 35 lbs/ft-width
Fabric (4.5 oz.)
Grab Tensile Strength ASTM D-4632 120 lbs.
Grab Elongation ASTM D-4632 50%
Puncture Strength ASTM D-4833 65 lbs
Mullen Burst ASTM D-3786 225 psi
Trapezoidal Tear ASTM D-4533 50 lbs
Wide Width Tensile ASTM D-4595 50 lbs/in
UV Resistance ASTM D-4355 70%
Apparent Opening Size (AOS) ASTM D-4751 70 US Standard Sieve
Permittivity ASTM D-44914 1.8 sec
Permeability ASTM D-44915 0.21 cm/sec
Water Flow Rate ASTM D-4491 135 gal/min/ft2
Roll Dimensions
Width 38 inches (36 inches usable w/ 2″ flange)
Length Up to 82 feet
Footnotes
1. Modified: an existing ASTM test was modified since a recognized test method had not been established for this type of product at time of testing.
2. Gradient of 0.1
3. Fabric to core
4. The property values listed below are effective 1/2/01 are subject to change without notice.
5. Values shown are in weaker principal direction. Minimum average roll values are calculated as the typical minus two standard deviations. Statistically, it yields a 97.7% degree of confidence that any samples taken from quality assurance testing will exceed the value reported.

Interested in Hydraway Drainage?

Contact MDTI at 877-765-8391 or fill out the form to the right for more information and to receive a custom product quote.